Electronic Materials Department

ガラス用ディファレンシャルテープ (ABテープ)

Blue-light Cutting Differential Tape (AB Tape) for Glass

Features

  1. 1)Through the use of special silicon adhesive materials, the tape features excellent air-expelling properties during lamination.
  2. 2)Legibility is also good thanks to excellent optical properties.
  3. 3)The acrylic adhesive layer employs a strong adhesive type while simultaneously providing good re-workability.
  4. 4)The tape also features blue-light cutting capabilities.

Applications

  1.  ・Laminating on to glass (surface protective glass, etc. for mobile devices and other equipment)
  2.  ・Fixing after single-sided lamination, lamination where the reverse side requires reworking or air-expelling properties

Construction

Construction: Blue-light Cutting Differential Tape (AB Tape) for Glass ISR-IT100BLCX1

Properties

Property Measured Value Unit Method
Tape Thickness 100 μ JIS-K-7130
Blue-light Cutting
Performance
(405nm Light Transmittance)
12.95 % Spectrophotometer
Light Transmittance 92.65 % JIS-K-7361
HAZE 0.98 % JIS-K-7136
Si layer (To Glass) 0.06 N/25mm JIS-Z-0237
OCA layer (To Glass) 20.9 N/25mm JIS-Z-0237

Data in these materials are measured values and do not constitute guaranteed values.

>Visit this page to inquire about ISR-IT100BLCX1 Blue-light Cutting Differential Tape (AB Tape) for Glass.

Differential Tape (AB Tape) for Glass ISR-AS115

Features

  1. 1)Through the use of special silicon adhesive materials, the tape features excellent air-expelling properties during lamination.
  2. 2)Legibility is also good thanks to excellent optical properties.
  3. 3)The acrylic adhesive layer employs a strong adhesive type while simultaneously providing good re-workability.

Applications

  1.  ・Laminating on to glass (surface protective glass, etc. for mobile devices and other equipment)
  2.  ・Fixing after single-sided lamination, lamination where the reverse side requires reworking or air-expelling properties

Construction

Construction: Differential Tape (AB Tape) for Glass ISR-AS115

Properties

Property Measured Value Unit Method
Tape Thickness 115 μ JIS-K-7130
Light Transmittance 93.15 % JIS-K-7361
HAZE 0.91 % JIS-K-7136
Si layer (To Glass) 0.05 N/25mm JIS-Z-0237
OCA layer (To Glass) 16 N/25mm JIS-Z-0237

Data in these materials are measured values and do not constitute guaranteed values.

>Visit this page to inquire about ISR-AS115 Differential Tape (AB Tape) for Glass.

Differential Tape (AB Tape) for Glass ISR-AS100

Features

  1. 1) Due to its special absorption design, this differential tape features high air-expelling performance that leaves no air bubbles on 0.2mm ~ 0.4mm glass.
  2. 2)Legibility is also good thanks to excellent optical properties.
  3. 3)Shatter-resistance properties are also excellent.

Applications

  1.  ・Laminating on to glass (surface protective glass, etc. for mobile devices and other equipment)
  2.  ・Fixing after single-sided lamination, lamination where the reverse side requires reworking or air-expelling properties

Construction

Construction: Differential Tape (AB Tape) for Glass ISR-AS100

Properties

Property Measured Value Unit Method
Tape Thickness 100 μ JIS-K-7130
Light Transmittance 93.24 % JIS-K-7361
HAZE 0.52 % JIS-K-7136
Si layer (To Glass) 0.06 N/25mm JIS-Z-0237
OCA layer (To Glass) 20.9 N/25mm JIS-Z-0237

Data in these materials are measured values and do not constitute guaranteed values.

>Visit this page to inquire about ISR-AS100 Differential Tape (AB Tape) for Glass.

Differential Tape (AB Tape) for Glass ISR-AS85

Features

  1. 1) Due to the special silicon layer, air-expelling performance is excellent, leaving no air bubbles during lamination.
  2. 2)Legibility is also good thanks to excellent optical properties.
  3. 3)The acrylic adhesive layer employs a strong adhesive type while simultaneously providing good re-workability.
  4. 4)This is the thinnest product in the industry for this application.

Applications

  1.  ・Laminating on to glass (surface protective glass, etc. for mobile devices and other equipment)
  2.  ・Fixing after single-sided lamination, lamination where the reverse side requires reworking or air-expelling properties

Construction

Construction: Differential Tape (AB Tape) for Glass ISR-AS85

Properties

Property Measured Value Unit Method
Tape Thickness 85 μ JIS-K-7130
Light Transmittance 93.04 % JIS-K-7361
HAZE 0.70 % JIS-K-7136
Si layer (To Glass) 0.04 N/25mm JIS-Z-0237
OCA layer (To Glass) 20.9 N/25mm JIS-Z-0237

Data in these materials are measured values and do not constitute guaranteed values.

>Visit this page to inquire about ISR-AS85 Differential Tape (AB Tape) for Glass.